G83 Peck Drilling Cycle (Deep Hole) for Fanuc

In (c)NC, G-Code, Start Here by Micah HoffmannLeave a Comment

G83 Peck Drilling Cycle G-code is modal so that it is activated every X and/or Y axis move, and it will rapid to that position and then cause this canned cycle (Drilling) to be executed again, until it’s canceled (G80). Contents G83 Deep Hole Peck Drilling Cycle Operation G83 Peck Drilling Cycle Format G83 Deep Hole Peck Drilling Cycle Operation G83 Deep Hole Peck Drilling Cycle for Fanuc As G83 is a Peck drilling cycle so the depth for each peck in G83 drilling cycle will be the amount defined with Q. The tool will take the peck (Q deep) …

View Post

Setting up a CNC lathe – FANUC G50

In (c)NC, G-Code, Setup, Start Here by Micah HoffmannLeave a Comment

Note: The G-code and procedures assume Fanuc controller, but concepts can be used across brands. “Making The Connection” There are three important relationships you need to make when setting a CNC lathe. Machine Zero or Reference Point. Tool Change Position/Safe move (G50) Program Zero 1 and 2 are the XZ location of the center of the tool turret. Setting Tool Length Offsets using Q-setter (Note: If you need to know the manual version of this process, let me know) For the love of sweet baby whoever, if you don’t already have a Q-setter automated tool offset system… go get your …